| 39 |
|
|
|
|
|
| 6600 Series |
|
|
|
|
|
| General Description | Current and Voltage Rating | Interrupting Capacity | Approvals* |
|
|
| • Sub-miniature bimetal thermostat | • | • | • UL recognized |
|
| • 8-PIN DIP package configuration | 0.50 to 16.0 amps at 240 VAC, 50/60 Hz | 1000 amps | • CSA certified |
|
| • Snap-acting trip mechanism increases operational life | • 0.50 to 16 amps at 50 VDC |
| • VDE approved |
|
| • Single pole, single throw, automatic reset | • 0.50 to 12 amps at 24 VDC (VDE) |
|
|
|
|
|
|
|
|
|
|
| 6700 Series |
|
|
|
|
|
| General Description | Current and Voltage Rating | Interrupting Capacity | Approvals* |
|
|
| • Sub-miniature bimetal thermostat | • | • | • |
|
|
| • TO-220 package configuration | 2.5 to 20.0 amps at 240 VAC, 50/60 Hz | 1000 amps | UL recognized |
|
| • Snap-acting trip mechanism increases operational life | • 2.5 to 20 amps at 50 VDC |
| • CSA certified |
|
| • Single pole, single throw, automatic reset |
|
| • TUV approved |
|
| • VDE approved “P” version is available |
|
| • CE compliant |
|
|
|
| IAR/IUR/IER/CUR/CER |
|
| General Description | IAL/IUL/IEL |
|
|
|
|
| • 1U (1RU) hydraulic magnetic circuit breaker |
|
|
|
|
|
| • Low-profile design | General Description |
|
|
|
|
| • Auxiliary switch options available for alarm signaling | • IEL versions meet IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950 and VDE 0730, 0804 and 0805 |
| • Multi-pole options with multi or single handle |
|
|
|
| Current and Voltage Rating | • Auxiliary switch options |
|
|
|
|
| • | • Snap-in mounting option |
|
|
|
|
| 2 to 50 amps at 80 VDC and 250 VAC | • Mid-trip handle option |
|
|
|
|
| • 2 to 30 amps, 120/240VAC (2 poles) | • Various actuator options |
|
|
|
|
| • Dual frequency delay options |
|
|
|
|
| Interrupting Capacity |
|
|
|
|
|
| • | Max. Poles |
|
|
|
|
| 5000 amps, 65VDC | • 6 |
|
|
|
|
| • 5000 amps, 80VDC |
|
|
|
|
|
| • 2000 amps, 250VAC | Current and Voltage Rating |
|
|
|
|
| • 5000 amps, 120/240VAC (2poles) | • |
|
|
|
|
| • 5000 amps, 80VDC (2 poles) | 0.05 to 100 amps at 65 VDC |
|
|
|
|
| • 0.05 to 70 amps at 80 VDC |
|
|
|
|
| Approvals* | • 0.05 to 50 amps at 250VDC |
|
|
|
|
| • | • 0.05 to 50 amps at 300VDC |
|
|
|
|
| C-UL recognized | • 0.05 to 70 amps at 240 VAC, 50/60 Hz |
|
|
|
| • UL1077 recognized | • 0.05 to 50 amps at 277 VAC, 50/60 Hz |
|
|
|
| • UL489A listed | • 0.05 to 50 amps at 277/480 VAC, 50/60 Hz |
|
|
|
| • TUV approved | • 0.05 to 50 amps at 250 VAC, 400 Hz |
|
|
|
|
|
|
|
|
|
|
| T/R/PP/PR/CPP/CPR/CR ( SNAPAK® ) | Interrupting Capacity |
|
|
|
|
| • |
|
|
|
|
| General Description | 5000 amps, 240 VAC, 50/60 Hz |
|
|
|
|
| • Compact magnetic-hydraulic circuit protector | • 1500 amps, 250 VAC, 400 Hz |
|
|
|
|
| • Snap-acting trip mechanism increases operational life | • 7500 amps, 80 VDC |
|
|
|
|
| • Aesthetically pleasing for front panel mounting | • 2000 amps, 240 VAC, 50/60 Hz (VDE) |
|
|
|
| • Toggle, rocker, push-pull and push-to-reset actuation options | • 2000 amps, 415 VAC, 50/60 Hz (VDE) |
|
|
|
| • 4000 amps, 80 VDC (VDE) |
|
|
|
|
| Max. Poles | • 1200 amps, 277/480 VAC, 50/60 Hz |
|
|
|
|
| • 2 | • 5000 amps, 250VDC |
|
|
|
|
| • 1000 amps, 300VDC |
|
|
|
|
| Current and Voltage Rating |
|
|
|
|
|
| • | Approvals* |
|
|
|
|
| 0.10 to 7.5 amps at 50 VDC and 250 VAC | • |
|
|
|
|
| • 0.10 to 30 amps at 32 VDC | UL recognized |
|
|
|
|
| • 0.10 to 30 amps at 120 VAC | • CSA certified |
|
|
|
|
| • 0.10 to 25 amps at 120/240 VAC (two poles) | • VDE approved (IEL) |
|
|
|
|
| • 0.10 to 20 amps at 250 VAC (50/60 Hz, at 500AIC) | • CE compliant (IEL) |
|
|
|
|
| • 0.10 to 20 amps at 65 VDC [two poles, at 500AIC] | • CCC approved |
|
|
|
|
| • UL 1500 certified |
|
|
|
|
| Interrupting Capacity | • QPL to MIL-PRF- 5562 |
|
|
|
|
| • |
|
|
|
|
|
| 1000 amps | General Description |
|
|
|
|
| •LEL versions meet IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950 and VDE 0730, 0804 and 0805 |
| Approvals* | •Multi-pole options with multi or single handle |
|
|
|
| • | •Auxiliary switch options |
|
|
|
|
| UL recognized | •Snap-in mounting option |
|
|
|
|
| • CSA certified | •Mid-trip handle option |
|
|
|
|
| • TUV approved | •Various actuator options |
|
|
|
|
| • CE compliant | •Dual frequency delay options |
|
|
|
|
| • CCC approved |
|
|
|
|
|
| Max. Poles |
|
|
|
|
| AP/UP, AP-MIL | •3 |
|
|
|
|
|
|
|
|
|
|
| General Description | Current and Voltage Rating |
|
|
|
|
| • QPL to MIL-PRF-39019 | • |
|
|
|
|
| • Sealed magnetic-hydraulic circuit protection | 0.05 to 100 amps at 80 VDC |
|
|
|
|
| • Can withstand 100G shock repeatedly | •0.05 to 50 amps at 125 VAC, 50/60 Hz |
|
|
|
|
| • Tolerates 10G vibration from 10 to 2000 Hz under full load | •0.05 to 80 amps at 120/240 VAC, 50/60 Hz |
|
|
|
| • Ideal for use in Class 1, Div. 2 Groups A, B, C and D hazardous locations | •0.05 to 100 amps at 80 VDC (VDE) |
|
|
|
|
| •0.05 to 50 amps at 250 VAC (VDE) |
|
|
|
|
| Max. Poles |
|
|
|
|
|
| • | Interrupting Capacity |
|
|
|
|
| 3 | •50000 amps 80 VDC |
|
|
|
|
| •5000 amps, 125 VAC, 120/240 VAC 50/60 Hz |
|
|
|
| Current and Voltage Rating | •2000 amps, 80 VDC |
|
|
|
|
| AP ratings | •2000 amps, 250 VAC, 50/60 Hz (VDE) |
|
|
|
|
| • 0.05 to 20 amps at 50 VDC and 240 VAC | •10000 amps, 120/240VAC, 50/60 Hz |
|
|
|
|
|
|
|
|
|
|
| UP ratings (single pole only) | Approvals* |
|
|
|
|
| • 0.05 to 20 amps at 50 VDC | • |
|
|
|
|
| • 0.05 to 15 amps at 120 VAC | UL 489 listed |
|
|
|
|
| • 0.05 to 7.5 amps at 240 VAC | •CSA certified |
|
|
|
|
| •VDE approved |
|
|
|
|
| Interrupting Capacity | •CE compliant |
|
|
|
|
| AP ratings | •CCC approved |
|
|
|
|
| • 500 amps, 50 VDC, 120 VAC |
|
|
|
|
|
| • 300 amps, 240 VAC | IULP/LELP/CELP |
|
|
|
|
|
|
|
|
|
|
| UP ratings | General Description |
|
|
|
|
| • 1000 amps, 50VDC, 240 VAC | •Unique, parallel current sensing design |
|
|
|
| •Compact size, high current capacity |
|
|
|
| Approvals* | •Auxiliary switch options |
|
|
|
|
| • | •Mid-trip handle option |
|
|
|
|
| MIL-PRF-M39019 |
|
|
|
|
|
| • UL recognized (UP type only) | Max. Poles |
|
|
|
|
| • FM approved (UP type only) | •1 |
|
|
|
|
|
|
|
|
|
|
| IPA/CPA | Current and Voltage Rating |
|
|
|
|
| General Description | • |
|
|
|
|
| • Compact magnetic-hydraulic circuit protection | 125 amps at 80 VDC† |
|
|
|
|
| • Quick-connect, screw, PC board mount terminals | • 150 amps at 80 VDC† |
|
|
|
|
| • Auxiliary switch options | • 175 amps at 80 VDC† |
|
|
|
|
| • Multi-pole options with multi or single handle | • 200 amps at 80 VDC† |
|
|
|
|
| • 250 amps at 80 VDC† |
|
|
|
|
| Max. Poles | • |
|
|
|
|
| • 3 | 251 - 300 amps at 80 VDC†† |
|
|
|
|
|
|
|
|
|
|
| Current and Voltage Rating | † Two paralleled poles |
|
|
|
|
| • | †† Three paralleled poles |
|
|
|
|
| 0.05 to 30 amps at 65 VDC |
|
|
|
|
|
| • 0.05 to 20 amps at 80 VDC (300 AIC) | Interrupting Capacity |
|
|
|
|
| • 0.05 to 25 amps at 250 VAC, 50/60 Hz | • |
|
|
|
|
| • 25.1 to 30 amps at 240 VAC, 50/60 Hz | 10000 amps, 80 VDC |
|
|
|
|
| • 0.10 to 15 amps at 250 VAC, 400 Hz | • 50000 amps, 65 VDC (up to 150 amps) |
|
|
|
| • 0.05 to 25 amps at 65 VDC (TUV) | • 10000 amps, 80 VDC (> 150 amps) |
|
|
|
| • 0.05 to 25 amps at 250 VAC, 50/60 Hz (TUV) |
|
|
|
|
|
| • 0.05 to 15 amps at 250 VAC, 400 Hz (TUV) | Approvals* |
|
|
|
|
| • |
|
|
|
|
| Interrupting Capacity | UL 489 listed |
|
|
|
|
| • | • UL 489A listed |
|
|
|
|
| 1000 amps | • CSA certified |
|
|
|
|
|
|
|
|
|
|
| Approvals* | IALR/IULR/IELR |
|
|
|
|
| • |
|
|
|
|
|
| UL 489A listed (CPA) | General Description |
|
|
|
|
| • UL recognized | •Meets IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950, and VDE 0730, 0804 and 0805 |
| • CUR recognized | •Designed to mount on standard 35mm DIN rails |
|
|
|
| • TUV certified |
|
|
|
|
|
| • CE compliant | Max. Poles |
|
|
|
|
| • CCC approved (pending) | • |
|
|
|
|
| 4 |
|
|
|
|
| General Description |
|
|
|
|
|
| •IEG versions meet IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950, and VDE 0730, 0804, and 0805 | Current and Voltage Rating |
|
|
|
|
| •Multi-pole options with multi or single handle | •.050 to 70 amps at 80 VDC |
|
|
|
|
| •Auxiliary switch options | •.050 to 70 amps at 250 VAC, 50/60 Hz |
|
|
|
|
| •Mid-trip handle option | •.100 to 50 amps at 80 VDC (VDE) |
|
|
|
|
| •Snap-in mounting option | •.100 to 50 amps at 250 VAC, 50/60 Hz (VDE) |
|
|
|
| •Dual frequency delay options | •.100 to 30 amps at 415 VAC, 50/60 Hz (VDE) |
|
|
|
|
|
|
|
|
|
| Max. Poles | Interrupting Capacity |
|
|
|
|
| •6 | •7500 amps, 80 VDC |
|
|
|
|
| •5000 amps, 250 VAC, 50/60 Hz |
|
|
|
|
| Current and Voltage Rating | •2000 amps, 277 VAC, 50/60 Hz |
|
|
|
|
| • | •2000 amps at 250 VAC, 50/60 Hz (VDE) |
|
|
|
|
| 0.05 to 50 amps at 80 VDC | •2000 amps at 415 VAC, 50/60 Hz (VDE) |
|
|
|
|
| •0.05 to 50 amps at 240 VAC | •4000 amps at 80 VDC (VDE) |
|
|
|
|
| •0.05 to 30 amps at 277 VAC, 50/60 Hz |
|
|
|
|
|
| •0.05 to 30 amps at 250 VAC, 400 Hz | Approvals* |
|
|
|
|
| •0.05 to 30 amps at 125 VAC, 50/60 Hz | • |
|
|
|
|
| •1 to 30 amps at 120/240 VAC, 50/60 Hz | UL recognized |
|
|
|
|
| •CSA certified |
|
|
|
|
| Interrupting Capacity | •VDE approved (IELR) |
|
|
|
|
| • | •CE compliant |
|
|
|
|
| 5000 amps, 240 VAC, 50/60 Hz |
|
|
|
|
|
| •1500 amps, 250 VAC, 400 Hz | 209/219/229/279 |
|
|
|
|
| •7500 amps, 80 VDC (IEG) |
|
|
|
|
|
| •5000 amps, 80 VDC (CEG) | General Description |
|
|
|
|
| •2000 amps, 250 VAC, 50/60 Hz (VDE) | •Front or back connected terminal styles |
|
|
|
|
| •4000 amps, 80 VDC (VDE) | •E-frame style model complies with UL 489 |
|
|
|
| •5000 amps, 125 VAC, 50/60 Hz (LEG) | •249 Power Selector Breaker system is listed as a branch circuit breaker per UL 489 |
|
| •5000 amps, 120/240 VAC, 50/60 Hz (LEG) | •Complies with international requirements |
|
|
|
|
| •279 complies with UL 489A |
|
|
|
|
| Approvals* |
|
|
|
|
|
| • | Max. Poles |
|
|
|
|
| UL 489 listed (LEG) | •6 |
|
|
|
|
| •UL 489A listed (CEG) |
|
|
|
|
|
| •UL recognized | Current and Voltage Rating |
|
|
|
|
| •CSA certified | •.100 to 100 amps at 160 VDC |
|
|
|
|
| •VDE approved (IEG, CEG, LEG) | •.100 to 125 amps at 125 VDC |
|
|
|
|
| •CE compliant | •.100 to 77 amps at 600 VAC |
|
|
|
|
| •CCC approved | •.100 to 100 amps at 347/600 VAC |
|
|
|
|
| •UL 1500 certified | •.100 to 100 amps at 120, 240, 277, 480 VAC |
|
|
|
| •QPL to MIL-PRF-55629 | •.100 to 100 amps, 125 VDC, 240/415 VAC (VDE) |
|
|
|
|
|
|
|
|
|
| MDS & MDS2 | Interrupting Capacity |
|
|
|
|
| •5000 amps |
|
|
|
|
| General Description | •10000 amps |
|
|
|
|
| •Modular Distribution System provides unprecedented flexibility | •4000 amps (VDE) |
|
|
|
|
| •“Hot Plug” modules allow for equipment expansion without power shutdown |
|
|
|
|
| •Unique alarm conductors simplify signal wiring | Approvals* |
|
|
|
|
| • | • |
|
|
|
|
| Modular load terminals available with front or rear access | UL 489 listed |
|
|
|
|
| •UL 489A listed (279) |
|
|
|
|
| Max. Poles | •UL recognized |
|
|
|
|
| • | •CSA certified |
|
|
|
|
| 24 | •VDE approved |
|
|
|
|
| •UL1500 certified |
|
|
|
|
| Current and Voltage Rating | •CCC approved |
|
|
|
|
| • | •CE compliant |
|
|
|
|
| Maximum load bus rating per position is 100 amps, 125VDC |
|
|
|
|
| PGFM | JAE/JRE/JTE/JLE |
|
|
|
|
|
|
|
|
|
|
| General Description | General Description |
|
|
|
|
| •GFCI sensing module designed to operate in tandem with the LEL series circuit breaker with a shunt voltage trip and auxiliary switch | •F-frame style complies with UL 489 |
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | •Various terminal options for design flexibility |
|
|
|
| •Automatic and manual reset configurations | •Reduced voltage drop through the circuit breaker compared to other protective devices |
|
| •Power and fault status indicators | •Auxiliary switch options |
|
|
|
|
| •Double insulated user interface | •Mid-trip handle options |
|
|
|
|
|
|
|
|
|
|
| Max. Poles‡ | Max. Poles |
|
|
|
|
| • | • |
|
|
|
|
| 3 | 6 |
|
|
|
|
|
|
|
|
|
|
| ‡ Number of circuit breaker poles | Current and Voltage Rating |
|
|
|
|
| UL489 |
|
|
|
|
| Ground Trip Current | •100 to 250 amps at 160 VDC |
|
|
|
|
| •4 to 6 mA | •100 to 250 amps at 65 VDC |
|
|
|
|
| •100 to 250 amps at 125/250 VDC |
|
|
|
|
| Trip Time, Combined Assembly | •100 to 250 amps at 240 VAC |
|
|
|
|
| •≤ 25 mS |
|
|
|
|
|
| UL489A |
|
|
|
|
| Rated Voltage | •275 to 800 amps at 160 VDC |
|
|
|
|
| •120 VAC or 240 VAC, 50/60 Hz | •275 to 1200 amps at 65 VDC |
|
|
|
|
|
|
|
|
|
|
| Let-Go Voltage | Interrupting Capacity |
|
|
|
|
| • | • |
|
|
|
|
| 60% of supply voltage | 10000 amps, 160 VDC |
|
|
|
|
| •10000 amps, 125/250 VDC |
|
|
|
|
| Interrupting Capacity | •65000 amps, 65 VDC |
|
|
|
|
| • | •10000 amps, 240 VAC |
|
|
|
|
| As per rating of Airpax™ LEL series | •18000 amps, 240 VAC |
|
|
|
|
| •100000 amps, 65VDC (UL489A up to 800 amps) |
|
|
|
| Approvals* |
|
|
|
|
|
| • | Approvals* |
|
|
|
|
| UL 943, Class A or | • |
|
|
|
|
| •UL 1053 Compliant | UL 489 listed |
|
|
|
|
| !5 Amp PGFP Plug Series | •UL 489A listed |
|
|
|
|
| •UL recognized |
|
|
|
|
| General Description | •CSA certified |
|
|
|
|
| •15 amp plug cordset GFCI series | •VDE approved |
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | •CCC approved |
|
|
|
|
| •Automatic and manual reset configurations | •CE compliant |
|
|
|
|
| •Available as a field wireable plug or with attached cords and outlets |
|
|
|
|
| •Plug assembly with power single or tri-tap outlet | 30 Amp PGFI Portable Series, Multi-Phase |
|
|
|
|
| •Electro-magnetically latched contacts |
|
|
|
|
|
| General Description |
|
|
|
|
| Rated Current | •30 amp multi-phase cordset GFCI series |
|
|
|
|
| •Up to 15 amps at 120 VAC, 50/60 Hz | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
| •Automatic and manual reset configurations |
|
|
|
| Ground Trip Current | •Dual indication lights displaying power and fault status |
|
|
|
| •4 to 6 mA | •Grounded and open neutral protected |
|
|
|
|
| •Electro-magnetically latched contacts |
|
|
|
|
| Insulation Voltage |
|
|
|
|
|
| •1500 VRMS - 1 minute | Rated Current |
|
|
|
|
| •Up to 30 amps |
|
|
|
|
| Endurance Operations |
|
|
|
|
|
| • | Rated Voltage |
|
|
|
|
| 3000 operations | •120/240 VAC dual voltage, 120/208 VAC 3Ø, 240 VAC 3Ø, 208 VAC 3Ø, 277 VAC 3Ø (non-UL or CSA) |
|
|
|
|
|
|
| Construction | Operating Voltage Range |
|
|
|
|
| • | •85% to 110% of rating |
|
|
|
|
| NEMA 3R rated |
|
|
|
|
|
| Ground Trip Current |
|
|
|
|
| Approvals* | • |
|
|
|
|
| • | 4 to 6 mA |
|
|
|
|
| cULus 943, Class A or |
|
|
|
|
|
| •UL recognized | Construction |
|
|
|
|
| 15 Amp PGFI In-line Series | • |
|
|
|
|
| NEMA 4X and 6P wet location rated |
|
|
|
|
| General Description |
|
|
|
|
|
| •15 amp in-line cordset GFCI series | Approvals* |
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | • |
|
|
|
|
| •Automatic and manual reset configurations | cULus 943, Class A |
|
|
|
|
| •Available as a field wireable plug or with attached cords and outlets |
|
|
|
|
| •Plug assembly with power single or tri-tap outlet | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
| •Electro-magnetically latched contacts |
|
|
|
|
|
|
|
|
|
|
|
| Rated Current |
|
|
|
|
|
| •Up to 15 amps at 120 VAC, 50/60 Hz |
|
|
|
|
|
|
|
|
|
|
|
| Ground Trip Current |
|
|
|
|
|
| •4 to 6 mA |
|
|
|
|
|
|
|
|
|
|
|
| Insulation Voltage | 227 |
|
|
|
|
| •1500 VRMS - 1 minute |
|
|
|
|
|
| 40, 50 & 60 Amp |
|
|
|
|
| Endurance Operations | PGFI Portable Series |
|
|
|
|
| • |
|
|
|
|
|
| 3000 operations | General Description |
|
|
|
|
| •40, 50 & 60 amp in-line ELCI series |
|
|
|
|
| Construction | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
| • | •Automatic and manual reset key switch selector |
|
|
|
| NEMA 3R rated | •Fault theshold key switch selector |
|
|
|
|
| •Available with locking connectors/ plugs or flying leads |
|
|
|
| Approvals* | •Electro-magnetically latched contacts |
|
|
|
|
| • |
|
|
|
|
|
| cULus 943, Class A | Rated Current |
|
|
|
|
| •cCSAus certified to CSA-C22.2 No. 144 or | •40, 50 or 60 amps |
|
|
|
|
| UL recognized |
|
|
|
|
|
| 20 Amp PGFI Portable Series | Rated Voltage |
|
|
|
|
| •120 VAC, 240 VAC, 208 VAC, 277 VAC, |
|
|
|
|
| General Description | 120/240 VAC, 3Ø 240 VAC, 3Ø 208 VAC, 3Ø 277 VAC, 3Ø 480 VAC, 3Ø 600 VAC |
|
| •20 amp in-line cordset GFCI series |
|
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | Operating Voltage Range |
|
|
|
|
| •Automatic and manual reset configurations | •85% to 110% of rating |
|
|
|
|
| •Available with locking connectors / plugs or flying leads |
|
|
|
|
| •Electro-magnetically latched contacts | Ground Trip Current Threshold |
|
|
|
|
| • |
|
|
|
|
| Rated Current | Key switch selectable: 6, 10 and 30mA |
|
|
|
|
| •Up to 20 amps |
|
|
|
|
|
| Construction |
|
|
|
|
| Rated Voltage | • |
|
|
|
|
| •120 VAC, 208 VAC, 240 VAC, 277 VAC | NEMA 4X wet location rated |
|
|
|
|
|
|
|
|
|
|
| Operating Voltage Range | Approvals* |
|
|
|
|
| •85% to 110% of rating | • |
|
|
|
|
| UL 1053 compliant |
|
|
|
|
| Ground Trip Current | 30 Amp PGFS Permanent Series |
|
|
|
|
| • |
|
|
|
|
|
| 4 to 6 mA | General Description |
|
|
|
|
| •30 amp splice-in GFCI series |
|
|
|
|
| Construction | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
| • | •Automatic and manual reset configurations |
|
|
|
| NEMA 4X wet location rated | •Fault output options available |
|
|
|
|
| •Grounded and open neutral protected |
|
|
|
|
| Approvals* | •Electro-magnetically latched contacts |
|
|
|
|
| • |
|
|
|
|
|
| cULus 943, Class A | Rated Current |
|
|
|
|
| •cCSAus certified to CSA-C22.2 No. 144 | •Up to 30 amps |
|
|
|
|
| 30 Amp PGFI Portable Series |
|
|
|
|
|
| Rated Voltage |
|
|
|
|
| General Description | •120 VAC, 208 VAC, 240 VAC, 120/240 VAC 277 VAC (non-UL) |
|
|
| •30 amp in-line cordset GFCI series |
|
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | Operating Voltage Range |
|
|
|
|
| •Automatic and manual reset configurations | •85% to 110% of rating |
|
|
|
|
| •Available with locking connectors / plugs or flying leads |
|
|
|
|
| •Electro-magnetically latched contacts | Ground Trip Current |
|
|
|
|
| • |
|
|
|
|
| Rated Current | 4 to 6 mA |
|
|
|
|
| •Up to 30 amps |
|
|
|
|
|
| Construction |
|
|
|
|
| Rated Voltage | • |
|
|
|
|
| •120 VAC, 208 VAC, 240 VAC, 277 VAC | NEMA 4X and 6P wet location rated |
|
|
|
|
|
|
|
|
|
|
| Operating Voltage Range | Approvals* |
|
|
|
|
| •85% to 110% of rating | • |
|
|
|
|
| cULus 943, Class A |
|
|
|
|
| Ground Trip Current |
|
|
|
|
|
| •4 to 6 mA | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
| 30 Amp PGFS Permanent Series, Multi-Phase |
|
|
|
| Construction |
|
|
|
|
|
| • | General Description |
|
|
|
|
| NEMA 4X and 6P wet location rated | •30 amp multi-phase splice-in GFCI series |
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
| Approvals* | •Automatic and manual reset configurations |
|
|
|
| • | •Dual indication lights displaying power and fault status |
|
|
|
| cULus 943, Class A | •Grounded and open neutral protected |
|
|
|
|
| •cCSAus certified to CSA-C22.2 No. 144 | •Electro-magnetically latched contacts |
|
|
|
|
| SAS/SUS/SES |
|
|
|
|
|
| Rated Current |
|
|
|
|
| General Description | •Up to 30 amps |
|
|
|
|
| • Ultra-compact and ultra-light hydraulic- magnetic circuit protector |
|
|
|
|
| • Trip-free function | Rated Voltage |
|
|
|
|
| • Wiping-action, self-cleaning contacts | •120/240 VAC dual voltage, 120/208 VAC 3Ø, 240 VAC 3Ø, 208 VAC 3Ø, 277 VAC 3Ø (non-UL or CSA) |
| • Slide actuator |
|
|
|
|
|
| • | Operating Voltage Range |
|
|
|
|
| PCB terminals | •85% to 110% of rating |
|
|
|
|
|
|
|
|
|
|
| Max. Poles | Ground Trip Current |
|
|
|
|
| • | • |
|
|
|
|
| 1 | 4 to 6 mA |
|
|
|
|
|
|
|
|
|
|
| Current and Voltage Rating | Construction |
|
|
|
|
| • | • |
|
|
|
|
| 0.100 to 15.0 amps at 125 VAC, 50/60 Hz | NEMA 4X and 6P wet location rated |
|
|
|
|
| • 0.100 to 15 amps at 250 VAC, 50/60 Hz |
|
|
|
|
|
| • 0.100 to 15 amps at 32 VDC | Approvals* |
|
|
|
|
| • 0.100 to 15 amps at 50 VDC | • |
|
|
|
|
| cULus 943, Class A |
|
|
|
|
| Interrupting Capacity |
|
|
|
|
|
| • | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
| 500 amps | 40, 50 & 60 Amp |
|
|
|
|
| PGFS Permanent Series |
|
|
|
|
| Approvals* |
|
|
|
|
|
| • | General Description |
|
|
|
|
| UL recognized | •40, 50 & 60 amp splice-in ELCI series |
|
|
|
|
| • CSA certified | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
| • VDE approved | •Automatic / manual reset key switch |
|
|
|
|
| •Fault trip level key switch |
|
|
|
|
| SAR/SUR/SER | •Keyed power switch |
|
|
|
|
| •Dual indication lights displaying power and fault status |
|
|
|
| General Description | •Grounded and open neutral protected |
|
|
|
|
| •Ultra-compact and ultra-light hydraulic- magnetic circuit protector | •Electro-magnetically latched contacts |
|
|
|
|
| •Trip-free function |
|
|
|
|
|
| •Wiping-action, self-cleaning contacts | Rated Current |
|
|
|
|
| •Rocker actuator | •40, 50 or 60 amps |
|
|
|
|
| •.250” quick-connect or PCB terminals |
|
|
|
|
|
| Rated Voltage |
|
|
|
|
| Max. Poles | •120 VAC, 240 VAC, 208 VAC, 277 VAC, |
|
|
|
|
| •2 | 120/240 VAC, 3Ø 240 VAC, 3Ø 208 VAC, 3Ø 277 VAC, 3Ø 480 VAC, 3Ø 600 VAC |
|
|
|
|
|
|
|
| Current and Voltage Rating | Operating Voltage Range |
|
|
|
|
| •0.100 to 20.0 amps at 125 VAC, 50/60 Hz | •85% to 110% of rating |
|
|
|
|
| •0.100 to 15 amps at 250 VAC, 50/60 Hz |
|
|
|
|
|
| •0.100 to 15 amps at 32 VDC | Ground Trip Current |
|
|
|
|
| •0.100 to 30 amps at 50 VDC** | • |
|
|
|
|
| 6 mA, 10 mA and 30mA |
|
|
|
|
| ** Agency Approvals Pending |
|
|
|
|
|
| Construction |
|
|
|
|
| Interrupting Capacity | • |
|
|
|
|
| •500 amps | NEMA 4X wet location rated |
|
|
|
|
|
|
|
|
|
|
| Approvals* | Approvals* |
|
|
|
|
| •UL recognized | • |
|
|
|
|
| •CSA certified | UL 1053 compliant |
|
|
|
|
| •VDE approved | PGFR Duplex Receptacle Series |
|
|
|
|
|
|
|
|
|
|
| QAS/QAL/QFS/QFL | General Description |
|
|
|
|
| •15 / 20 amp duplex receptacle GFCI series |
|
|
|
| General Description | •PGFR model - standard wall receptacle |
|
|
|
|
| •Silver-link quick-action fuses | •Model has: Standard power indicator light Manual reset configuration TEST and RESET buttons |
| •L-type terminals construction for easy installation |
|
|
|
|
|
| •Resistive to repetitive currents | Rated Current |
|
|
|
|
| •Low power loss | •15 / 20 amps |
|
|
|
|
| •Excellent current-limiting characteristics |
|
|
|
|
|
| •Available options include fuse holder indicator fuse, microswitch | Rated Voltage |
|
|
|
|
| •120 VAC |
|
|
|
|
| Current and Voltage Rating |
|
|
|
|
|
| QAS25 | Operating Voltage Range |
|
|
|
|
| •20 to 100 amps at 250VAC, 300VDC | •85% to 110% of rating |
|
|
|
|
| QAL25 |
|
|
|
|
|
| •75 to 300 amps at 250VAC, 300VDC | Ground Trip Current |
|
|
|
|
| QAS60 | •4 to 6 mA |
|
|
|
|
| •20 to 75 amps at 600VAC, 500VDC |
|
|
|
|
|
| QAL60 | Approvals* |
|
|
|
|
| •100 to 300 amps at 600VAC, 500VDC | • |
|
|
|
|
| QFS25 | UL recognized for use under cULus 943, Class A |
|
|
|
| •10 to 100 amps at 250VAC, 400VDC |
|
|
|
|
|
| QFL25 | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
| •75 to 300 amps at 250VAC, 400VDC |
|
|
|
|
|
|
|
|
|
|
|
| Interrupting Capacity |
|
|
|
|
|
| QAS25 |
|
|
|
|
|
| •10KA at 250VAC, 300VDC |
|
|
|
|
|
| QAL25 |
|
|
|
|
|
| •10KA at 250VAC, 300VDC |
|
|
|
|
|
| QAS60 |
|
|
|
|
|
| •100KA at 600VAC,10KA at 500VDC |
|
|
|
|
|
| QAL60 |
|
|
|
|
|
| •100KA at 600VAC,10KA at 500VDC |
|
|
|
|
|
| QFS25 |
|
|
|
|
|
| •10KA at 250VAC, 400VDC |
|
|
|
|
|
| QFL25 |
|
|
|
|
|
| •10KA at 250VAC, 400VDC |
|
|
|
|
|
|
|
|
|
|
|
| Approvals* |
|
|
|
|
|
| • |
|
|
|
|
|
| QFS25: CSA certified UL recognized, TUV |
|
|
|
|
|
| General Description |
|
|
|
|
|
| • High voltage DC switch |
|
|
|
|
|
| • Compact design |
|
|
|
|
|
| • Available options include remote signal disconnect and auxiliary switch |
|
|
|
|
|
|
|
|
|
|
| Max. Poles |
|
|
|
|
|
| • |
|
|
|
|
|
| 3 |
|
|
|
|
|
|
|
|
|
|
|
| Current and Voltage Rating |
|
|
|
|
|
| • |
|
|
|
|
|
| Up to 30 amps at 300VDC, open voltage 450VDC |
|
|
|
|
| • > 5000cycles at 2x per minute, at nominal current |
|
|
|
|
| SARPV |
|
|
|
|
|
|
|
|
|
|
|
| General Description |
|
|
|
|
|
| •High voltage DC power switch |
|
|
|
|
|
| •Compact design |
|
|
|
|
|
| •Available options include remote signal disconnect and auxiliary switch |
|
|
|
|
|
|
|
|
|
|
| Max. Poles |
|
|
|
|
|
| •2 |
|
|
|
|
|
|
|
|
|
|
|
| Current and Voltage Rating |
|
|
|
|
|
| •Up to 10 amps at 300VDC, open voltage 450VDC |
|
|
|
|
|
| •> 5000cycles at 2x per minute, at nominal current |
|
|
|
|
| ADDITIONAL PRODUCTS |
|
|
|
|
|
|
|
|
|
|
|
| General Description |
|
|
|
|
|
| •AIRPAX™ & KLIXON™ Bimetal Thermostats |
|
|
|
|
|
| •KLIXON™ Air Flow Sensors |
|
|
|
|
|
| •AIRPAX™ Temperature Sensors |
|
|
|
|
|
| •KLIXON™ Aircraft Circuit Breakers |
|
|
|
|
|
| •KLIXON™ Thermal Circuit Breakers |
|
|
|
|
|
| DIMENSIONS™ |
|
|
|
|
|
| DC TO AC INVERTERS |
|
|
|
|
|
|
|
|
|
|
|
| General Description |
|
|
|
|
|
| •AIRPAX™ APG/UPG Series |
|
|
|
|
|
| •AIRPAX™ APL/UPL/205 Series |
|
|
|
|
|
| •AIRPAX™ 203 Series |
|
|
|
|
|
| EXISTING-DESIGN PRODUCTS |
|
|
|
|
|
|
|
|
|
|
|
| General Description |
|
|
|
|
|
| •Mobile AC Power |
|
|
|
|
|
| •International Standby Power |
|
|
|
|
|
| •Traffic Signal Backup |
|
|
|
|
|
| •Industrial (High Voltage) |
|
|
|
|
|
| •Military |
|
|
|
|
|
| SERIES |
|
|
|
|
|
| 15M020D |
|
|
|
|
|
| 26M048B |
|
|
|
|
|
| 26M024B |
|
|
|
|
|
| 35M048B |
|
|
|
|
|
| 35M024B |
|
|
|
|
|
| 35M020B |
|
|
|
|
|
| 35L048B |
|
|
|
|
|
| 35L024B |
|
|
|
|
|
| 35L020B |
|
|
|
|
|
| 42M048C |
|
|
|
|
|
| 42M100B |
|
|
|
|
|
| 57L048B |
|
|
|
|
|
| 57M024B |
|
|
|
|
|
| 57M048B |
|
|
|
|
|
| 60L048B |
|
|
|
|
|
| 60L024B |
|
|
|
|
|
| 4SQ |
|
|
|
|
|
| 4SHG (46mm) |
|
|
|
|
|
| 4SHG (56mm) |
|
|
|
|
|
| 26M048B-V |
|
|
|
|
|
| 35M048B-X |
|
|
|
|
|
| 42M048C-R |
|
|
|
|
|
| 42M048C-Z |
|
|
|
|
|
| K & L 92100 |
|
|
|
|
|
| K & L 92200 |
|
|
|
|
|
| L92400 |
|
|
|
|
|
|
|
|
|
|
|
| Series 15M020D Stepper Motors |
|
|
|
|
|
| 15M020D1B |
|
|
|
|
|
| Series 26M048B Stepper Motors |
|
|
|
|
|
| 26M048B1U | 26M048B2U | 26M048B1B | 26M048B2B |
|
|
| Series 26M024B Stepper Motors |
|
|
|
|
|
| 26M024B1U | 26M024B2U | 26M024B1B | 26M024B2B |
|
|
| Series 35M048B, 35M024B & 35M020B Stepper Motors |
|
|
|
|
| 35M048B1U | 35M048B2U | 35M024B1U | 35M024B2U | 35M020B1U | 35M020B2U |
| Series 35L048B, 35L024B & 35L020B Stepper Motors |
|
|
|
|
| 35L048B1U | 35L048B2U | 35L024B1U | 35L024B2U | 35L020B1U | 35L020B2U |
| Series 42M048C Stepper Motors |
|
|
|
|
|
| 42M048C1U | 42M048C2U | 42M048C1B | 42M048C2B |
|
|
| Series 42M100B Stepper Motors |
|
|
|
|
|
| 42M100B1U | 42M100B2U | 42M100B1B | 42M100B2B |
|
|
| Series 57L048B, 57M024B & 57M048B Stepper Motors |
|
|
|
|
| 57L048B1U | 57L048B2U | 57M024B1U | 57M024B2U | 57M048B1U | 57M048B2U |
| Series 60L048B & 60L024B Stepper Motors |
|
|
|
|
|
| 60L048B1U | 60L048B2U | 60L024B1U | 60L024B2U |
|
|
| Series 4SQ Stepper Motors 1.8° |
|
|
|
|
|
| 4SQ - 120B34S |
|
|
|
|
|
| Series 4SHG Stepper Motors 1.8° |
|
|
|
|
|
| 4SHG | 4SHG | 4SHG | 4SHG | 4SHG | 4SHG |
| 060A46S | 120A46S | 240A46S | 060A56S | 120A56S | 240A56S |
| Series 26M048B Stepper Motors With Gear Trains (Type V) |
|
|
|
|
| 26M048B1U | 26M048B2U | 26M048B1B | 26M048B2B |
|
|
| Series 35M048B Stepper Motors With Gear Trains (Type X) |
|
|
|
|
| 35M048B1U | 35M048B2U | 35M048B1B | 35M048B2B |
|
|
| Series 42M048C Stepper Motors With Gear Trains (Type R) |
|
|
|
|
| 42M048C1B | 42M048C2B | 42M048C1U | 42M048C2U |
|
|
| Series 42M048C Stepper Motors With Gear Trains (Type Z) |
|
|
|
|
| 42M048C1B | 42M048C2B | 42M048C1U | 42M048C2U |
|
|
| Series K92100 & L92100 Digital Linear Actuators |
|
|
|
|
|
| K92111-P1 |
|
|
|
|
|
| K92111-P2 |
|
|
|
|
|
| L92111-P1 |
|
|
|
|
|
| L92111-P2 |
|
|
|
|
|
| K92121-P1 |
|
|
|
|
|
| K92121-P2 |
|
|
|
|
|
| L92121-P1 |
|
|
|
|
|
| L92121-P2 |
|
|
|
|
|
| K92141-P1 |
|
|
|
|
|
| K92141-P2 |
|
|
|
|
|
| L92141-P1 |
|
|
|
|
|
| L92141-P2 |
|
|
|
|
|
| Series K92200 & L92200 Digital Linear Actuators |
|
|
|
|
|
| K92211-P1 |
|
|
|
|
|
| K92211-P2 |
|
|
|
|
|
| L92211-P1 |
|
|
|
|
|
| L92211-P2 |
|
|
|
|
|
| K92221-P1 |
|
|
|
|
|
| K92221-P2 |
|
|
|
|
|
| L92221-P1 |
|
|
|
|
|
| L92221-P2 |
|
|
|
|
|
| K92231-P1 |
|
|
|
|
|
| K92231-P2 |
|
|
|
|
|
| L92231-P1 |
|
|
|
|
|
| L92231-P2 |
|
|
|
|
|
| Series L92400 Digital Linear Actuators |
|
|
|
|
|
| L92411-P1 |
|
|
|
|
|
| L92411-P2 |
|
|
|
|
|
| L92421-P1 |
|
|
|
|
|
| L92421-P2 |
Không có nhận xét nào:
Đăng nhận xét